Tongue & Groove Ceilings, Walls and Vaults
T&G installed with a consistent layout, tight reveals and clean transitions where the run meets beams, walls and changes of plane.
The layout decides the result before the first board
A T&G ceiling is a long series of parallel lines. If the first board isn't set right, the error grows across the room and shows up as a tapered board at the far wall.
Vaults, dormers and beam intersections are where T&G gets difficult — every change of plane needs a transition that keeps the reveal reading consistent.
How we approach it
Material is acclimated before install so seasonal movement does not open the seams, and layout is planned so the last board is never a sliver.
We combine T&G with beams, coffers and trim so the whole ceiling package is detailed together.
What we do
- Ceilings, vaults and cathedral installs
- Accent and feature walls
- Porch and exterior ceilings
- Nickel gap, V-groove and shiplap profiles
- Pine, cedar, poplar and reclaimed stock
- Prefinish and site-finish coordination
Recent tongue & groove work
Projects featuring this work
Why Blue Ridge Carpenters for this work
Precision as the standard
Layout is set on site from real measurements, and joints, reveals and lines are held consistent from the first piece to the last.
Comfortable with complex work
Curves, odd angles, out-of-square walls and one-off details are normal work for us rather than a reason to simplify the design.
Quality control before we leave
We walk the finished work with you, correct anything that isn't right and leave the space clean.
How the work runs
- 01
Understand
We visit the space, look at the existing conditions and talk through what you want the finished work to do.
- 02
Clarify
We confirm scope, materials and details in writing so there are no surprises once we start.
- 03
Build & install
The run is laid out and balanced across the room, then boards are installed to a consistent reveal with transitions detailed at every plane change.
- 04
Review
We sight the full ceiling for line and reveal before trimming out.
Often done alongside
Decorative Beams
Box beams, hand-hewn timber and reclaimed beam ceilings installed dead straight.
Coffered Ceilings
Coffered and tray ceilings laid out to the room so every box reads equal.
Interior Trim Packages
Whole-house trim: base, casing, crown, aprons and every transition between them.
Common questions
Can T&G go on walls as well as ceilings?
Yes — ceilings, vaults, feature walls and porch soffits.
Do you install pre-finished material?
We install both pre-finished and unfinished material and coordinate with the finisher when the boards are finished on site.
Do you work with homeowners, builders and design professionals on tongue and groove?
Yes. We work directly with homeowners and also as a finish carpentry partner for builders, general contractors, architects and interior designers.
Can you work from drawings or a design we already have?
Yes. If you already have plans, elevations or reference images, we build to them and flag anything that won't work against the real conditions on site.
Have a tongue & groove project in mind?
Tell us about the space and we'll come back to you with next steps.